Toll Free Number
1-877-284-8969
1-877-284-VWNW
Ordering on-line is now simpler and secure!
Ways to Order Products
- Add to Secure shopping cart and proceed to check out.
- Simply email Vince listing your order.
- Call 812-284-4661 or toll free 1-877-284-8969 and place your order.
Most shipping via Priority Mail.
Sander Pad Extensions
6" and 12" Sizes
Available in 6" or 12"
lengths, a sanding pad extension
helps you reach into deep vessels or other hard to reach areas.
Extensions can be used with my hook-and-loop disc holder.
Recommended use with 1", 2" or 3" sanding pads.
(Pad and Discs not included!)
Compared to other Competitors 6" Sanding Pad Extension $19.99
_________________________________________________________________
CALIPERS AND DIVIDERS!!!
3 Piece 8" Heavy Duty
Square Leg Caliper and Divider.
These hefty calipers
are made from tool steel 1/4 inch square.
They have a fully polished finish with smooth edges.
The "split-nut" mechanisms makes opening and closing these
devices very speedy and accurate.
__________________________________________
3 Piece 12" Heavy Duty Square Leg Caliper and Divider.
These hefty calipers
are made from tool steel 1/4 inch square.
They have a fully polished finish with smooth edges.
The "split-nut" mechanisms makes opening and closing
these devices very speedy and accurate.
_________________________________________
Large 7" Double Ended Caliper
Large 7 inch Double Ended Caliper This large caliper has a reach of about 7 inches with an overall length of 14 inches. It is used to measure wall thicknesses of large size bowls and vessels during the turning process.
_________________________________________________________________
Heavy Duty Stainless Steel Protractor
This rugged polished steel protractor has
a 4 1/2 inch round head and is a full 2mm thick throughout. The large etched
scale is easy to read, and has double gradations from 0 to 180 degrees in
opposite directions. The length of the arm is 9 inches. Use it to draw parallel
lines at any angle or measure any angle such as bevels of any chisel or plane
blade.
_________________________________________________________________
Large Depth Gauge
This Quality Depth Gauge can measure the depth of up to 13 inch opening of 6 inch or attach a wood piece to the head of the depth gauge using two screws and you can measure the depth of any size vessel easily.
